Temperature protective gloves
Cold-resistant gloves TempIce 700
Thermal protection glovesFlexible, knitted cuffsSpecial Grip & Proof nitrile coatingCold protection down to -10 °CComfortable to wear, dexterity and flexibilityColor: blue / black
Cryo Protection Gloves CRYOKIT 400, CRYOKIT 550
Suitable for all work with liquid nitrogen and other cryogenic gases up to approx. minus 196 °C. Protects against cold and contact burns in case of leakage of liquid gas. The waterproof glove is made of a special elastic and laminated fabric.Interior insulation: polyester multi-layer fabric ( 410 g / m2 ) and polyolefin porelle membrane.According to normative EN 511, EN 420, EN 388, Cat III. Warning: Not intended for immersion in liquid nitrogen or other liquid cryogens.1 pair per pack
Cryo-Protection® Face Shield
The injection molded polycarbonate clear shield is shaped to hug your chest and side of your face when in use, and pivots up and out of the way when your task is done. The padded head gear has a ratchet band in the back and a pin-and-lock system over the top for a 2-way adjustable fit. A lightweight design meets ANSI Z87.1 requirements, is CE Cat. II, and is impact resistant. The head gear also withstands cryogenic splashes.
Cryo-Temperature Protection Cryo-Gaiters®
Cryogenic protection for ultra-cold applications down to -196 °CMade from state-of-the-art waterproof materialsUniversal size to cover a wide range of shoe and boot typesAdjustable Velcro® fastenersTab on the upper boot is included for quick removalA formed fit over the toe cap ensures the gaiter stays securely in placeGaiter height: 410 mm1 pair per pack
Cryo-Temperature Protection Kit CRYO-TEMP-SHIELD®
Consisting of:1 pair Cryo Gloves® Standard, size: optional, see table1 x face protection shield with adjustable head mounting2 x safety labels, 300 mm diameter, entitled "Face protection" and "Wear gloves"1 x protection apron, Cryo Apron®, width: 610 mm, length: 1070 mm
Hand protection HotGrip, silicone rubber, for thumb and 2-3 fingers
The hand protection made of highly cold- and heat-resistant silicone rubber protects against burns and freezing. Deep frozen, hot or boiling substances and apparatus can thus be handled safely.Temperature range from -50 to 200 °C (briefly up to 250 °C)Extremely elastic and slip-proof
Hand protection HotGrip, silicone rubber, for thumb and one finger
The hand protection made of highly cold- and heat-resistant silicone rubber protects against burns and freezing. Deep frozen, hot or boiling substances and apparatus can thus be handled safely.Temperature range from -50 to 200 °C (briefly up to 250 °C)Extremely elastic and slip-proof
Hand Protectors Hot Hand®
Made of thick-walled silicone.Safe, non-slip protection against very hot or cold surfaces.Measures 10 x 19 cm with durable silicone rubber construction that remains flexible from -57 °C to +260 °C. End pockets accept thumb and fingers to grasp objects.Mitts have multiple studs with concave tips thus providing secure grip on virtually all hot/cold surfaces.
Heat protection coat
up to 1000 °C radiation heatmade of preox-aramid-aluminium high vacuum coating approx. 260 g/m²very soft qualityheat resistant hook-and-loop fastener and stand collarinsulated press button on both sideslength approx. 1200 mmDIN EN ISO 11612Other sizes available on request.
Heat protection frontal protection coat
Up to 1000 °C radiation heatMaterial:Preox-aramid with aluminium high vacuum coating, approx. 260 g/m2-Very soft qualityHeat resistant hook-and-loop fastenerOpen backLength approx. 1300 mmDIN EN ISO 11612
Heat Protective Gloves, up to +250 °C
Kevlar is a material with universal properties, one of them being a very high resistance to thermal loads. Kevlar can protect against temperatures up to around 300 °C (physical contact) and 450-500 °C (radiant heat). Additionally, this Kevlar glove is very durable and does an excellent job of protecting against cut and puncture injuries. Double knit (two-layer) construction. Length approx. 40 cm, with knitted cuffs for better fit, universal size.
LLG-Heat/Cold hand protector "TempHand", silicone rubber
Gripper made of red silicone rubber to protect hands when handling hot or cold vessels. Suitable for temperatures from -50 °C up to 250 °C. Two grip openings for quick and easy use. One size fits all, can be used on both sides. With non-slip grip surface.
Protection Gloves Cryo Gloves® Standard, elbow length
For protecting hands and arms when working in very low temperatures down to approx. -196 °C. Available in wrist-, underarm-, elbow- and shoulder-length versions.For work in ultra-low freezersFor working with dry ice at -79° CWorking in the gas phase of liquid nitrogen (without direct contact with liquid nitrogen)According to EN 511, EN 420, EN 388, Cat.IIIPack of 1 pairAttention: Not suitable for immersion in cryogenic liquids.The length of the glove varies between 440 ... 500 mm, depending on the size (S, M, L, XL or XXL)
Protection Gloves Cryo Gloves® Standard, forearm length
For protecting hands and arms when working in very low temperatures down to approx. -196 °C. Available in wrist-, underarm-, elbow- and shoulder-length versions.For work in ultra-low freezersFor working with dry ice at -79° CWorking in the gas phase of liquid nitrogen (without direct contact with liquid nitrogen)According to EN 511, EN 420, EN 388, Cat.IIIPack of 1 pairAttention: Not suitable for immersion in cryogenic liquids.For protecting hands and arms when working in very low temperatures down to approx. -196 °C. Available in wrist-, underarm-, elbow- and shoulder-length versions.For work in ultra-low freezersFor working with dry ice at -79° CWorking in the gas phase of liquid nitrogen (without direct contact with liquid nitrogen)According to EN 511, EN 420, EN 388, Cat.IIIPack of 1 pairThe length of the glove varies between 335-395 mm, depending on which size is ordered (S, M, L, XL or XXL)Attention: Not suitable for immersion in cryogenic liquids.
Protection Gloves Cryo Gloves® Standard, shoulder length
For protecting hands and arms when working in very low temperatures down to approx. -196 °C. Available in wrist-, underarm-, elbow- and shoulder-length versions.For work in ultra-low freezersFor working with dry ice at -79° CWorking in the gas phase of liquid nitrogen (without direct contact with liquid nitrogen)According to EN 511, EN 420, EN 388, Cat.IIIPack of 1 pairAttention: Not suitable for immersion in cryogenic liquids.The length of the glove varies between 620 ... 695 mm, depending on the size (S, M, L, XL or XXL)
Protection Gloves Cryo Gloves® Standard, wrist length with knitted cuff
For protecting hands and arms when working in very low temperatures down to approx. -196 °C. Available in wrist-, underarm-, elbow- and shoulder-length versions.For work in ultra-low freezersFor working with dry ice at -79° CWorking in the gas phase of liquid nitrogen (without direct contact with liquid nitrogen)According to EN 511, EN 420, EN 388, Cat.IIIPack of 1 pairAttention: Not suitable for immersion in cryogenic liquids.The length of the glove varies between 280 ... 330 mm, depending on the size (S, M, L, XL or XXL)
Protection Gloves Cryo Gloves® Waterproof forearm length
For protecting hands and arms when working in very low temperatures down to approx. -196 °C. Available in wrist-, underarm-, elbow- and shoulder-length versions.For work in ultra-low freezersFor working with dry ice at -79° CWorking in the gas phase of liquid nitrogen (without direct contact with liquid nitrogen)According to EN 511, EN 420, EN 388, Cat.IIIPack of 1 pairAttention: Not suitable for immersion in cryogenic liquids.The original Waterproof CRYO-GLOVES® ensure safe handling of cryogenic liquefied gases. The Waterproof version is 100% waterproof and additionally equipped with a seamless, thermal inner glove that draws moisture away from the hands so that work can be carried out comfortably for longer periods.The length of the glove varies between 335-395 mm, depending on the size (S, M, L, XL or XXL)Caution: Not suitable for immersion in liquid nitrogen or other cryogenic liquids!
Protection Gloves Cryo Gloves® Waterproof shoulder length
For protecting hands and arms when working in very low temperatures down to approx. -196 °C. Available in wrist-, underarm-, elbow- and shoulder-length versions.For work in ultra-low freezersFor working with dry ice at -79° CWorking in the gas phase of liquid nitrogen (without direct contact with liquid nitrogen)According to EN 511, EN 420, EN 388, Cat.IIIPack of 1 pairAttention: Not suitable for immersion in cryogenic liquids.The original Waterproof CRYO-GLOVES® ensure safe handling of cryogenic liquefied gases. The Waterproof version is 100% waterproof and additionally equipped with a seamless, thermal inner glove that draws moisture away from the hands so that work can be carried out comfortably for longer periods.The length of the glove varies between 620 ... 695 mm, depending on the size (S, M, L, XL or XXL)Caution: Not suitable for immersion in liquid nitrogen or other cryogenic liquids!
Protection Gloves Cryo Gloves® Waterproof, elbow length
For protecting hands and arms when working in very low temperatures down to approx. -196 °C. Available in wrist-, underarm-, elbow- and shoulder-length versions.For work in ultra-low freezersFor working with dry ice at -79° CWorking in the gas phase of liquid nitrogen (without direct contact with liquid nitrogen)According to EN 511, EN 420, EN 388, Cat.IIIPack of 1 pairAttention: Not suitable for immersion in cryogenic liquids.The original Waterproof CRYO-GLOVES® ensure safe handling of cryogenic liquefied gases. The Waterproof version is 100% waterproof and additionally equipped with a seamless, thermal inner glove that draws moisture away from the hands so that work can be carried out comfortably for longer periods.The length of the glove varies between 440 ... 500 mm, depending on the size (S, M, L, XL or XXL)Caution: Not suitable for immersion in liquid nitrogen or other cryogenic liquids!
Protection Gloves Cryo Gloves®Waterproof, wrist length with knitted cuff
For protecting hands and arms when working in very low temperatures down to approx. -196 °C. Available in wrist-, underarm-, elbow- and shoulder-length versions.For work in ultra-low freezersFor working with dry ice at -79° CWorking in the gas phase of liquid nitrogen (without direct contact with liquid nitrogen)According to EN 511, EN 420, EN 388, Cat.IIIPack of 1 pairAttention: Not suitable for immersion in cryogenic liquids.The original Waterproof CRYO-GLOVES® ensure safe handling of cryogenic liquefied gases. The Waterproof version is 100% waterproof and additionally equipped with a seamless, thermal inner glove that draws moisture away from the hands so that work can be carried out comfortably for longer periods.The length of the glove varies between 280 ... 330 mm, depending on the size (S, M, L, XL or XXL)Caution: Not suitable for immersion in liquid nitrogen or other cryogenic liquids!
Protection Gloves CRYOLITE
CRYOLITE is a fully waterproof glove to protect the hand and forearm in operations that involve the use of liquid nitrogen (or other cryogenic gases) and heat.Made by materials specifically designated for this application, it keeps the hands warm and dry for long periods of use. Tested, with success, by contact with liquid nitrogen (-195.82 ° C) for one minute and following test of flexibility (RCT method). Suitable for contact with Liquid Oxygen (Oxygen Index O.I. 25,4 external layer - Test Report 166/2016 Dipartimento di Ingegneria Padova.The multilayered construction allows a high level of thermal protection, flexibility and dexterity from -200 ° C to 250 ° C.An inner lining made of soft polyester fleece protects against contact cold.Pack of 1 pair.
Protection Gloves Waterproof Cryo-Grip® Gloves
Waterproof Cryo-Grip® Gloves offer improved grip on small objects while protecting your hands and arms when working in hazardous, ultra-cold environments. Gloves are designed to provide a high level of thermal protection where the exposure to cryogenic fluids might exist. Made from state-of-the-art materials and a multi-layered construction, the gloves are designed to keep you dry and to wick moisture away from your hands, so you can work in comfort for extended periods of time and allows a maximum level of grip, dexterity, flexibility, and thermal protection - essential features when function is important and safety is critical.1 pair per pack.CAUTION: Not intended for immersion in liquid nitrogen or other liquid cryogens.
Safety Gloves Clavies®, Heat Protection up to 232°C
Soft, pliant, all-cotton terry cloth gloves are superb for handling hot objects out of the autoclave or oven, or for other heat protection in the lab, school or industry. Note: Gloves are not waterproof and should not be used to handle dry ice.
Safety Gloves Nomex®, Heat Protection up to 250 °C
Very supple, offering excellent movement. Knitted construction, without seams. Temperature resistant up to 250 °C. 1 pair per pack. Cat. II